F-52 AD ALIPHATIC URETHANE CONCRETE DRESSING

F-52 AD is a proprietary formulation that allows longer working time with a snap-cure. It combines our water-based urethane resin and aliphatic hardener with our proprietary blend of portland cement, lime and fillers (PN 1352 D). It has been formulated to work with our TD and SL systems to provide the highest degree of impact, UV resistance, and thermal shock resistance of any urethane concrete on the market. It’s low odor and easy application make it perfect for industrial and durable decorative applications.

Uses and Benefits

F-52 AD is most often used as a topcoat for our TD and SL systems. It's low viscosity and tenacious bond to concrete make it an excellent prime/build coat for many decorative and industrial applications. F-52 AD can also be used as a primer when concrete floors exhibit high moisture transmission levels and can be applied to green concrete.

Limitations

Each mix of F-52 AD will cover 160 sq. ft. at 25 mils theoretical coverage. A waste factor of 5% should be estimated when mixing and installing. Ideal application temperatures to be between 50-80°F. Cooler temperatures will increase cure times. Warmer temperatures will decrease working and cure times.

Preparation

The preparation method for each project is determined by a full understanding of the substrate to be coated, the chemistry of the coating system being used, the coating system thickness, and numerous other factors. The coating installer should fully read and understand ICRI Guideline NO. 310.2R-2013 and OSHA 29 CFR 1926.1153 before starting preparatory work. The aim, of preparing a substrate for coating applications, is to roughen the surface, remove weak layers, contaminants, dirt, debris and present a solid, clean, dry substrate for the primer. If unsure as to the level of preparation needed contact Polymer Nation at Lab@polymerNation.com.